Load door

[Bullfye]

Hi there everyone,

U am making a house Mod...and its almost finished ,

However there is a load door that my followers do not want to get in...

The house main door that connects to Tamriel its ok , they enter and exit no problems, but then there is the real Entrance to the House and that door they do not enter,

I have made the Nave Meshes and checked if the triangles near the door were green and they are but somehow the followers do not cross that door..

Can someone tell me or give me some info and advisee on what can be wrong...

Maybe its the distance of the green triangles from the door or something that I am missing..

I will appreciate any help on this please..

TY all....

[Tamira]

What do you mean with "real door"?

Have you checked that your interior navmesh is coherent? I once made an NPC (placed outside) and told him to go to sleep at night time inside the house in the bed. Which he did not, he did not even enter the house. I finally found out that I forgot to connect the navmesh of the upper and the lower floor of the interior at a certain spot at the beginning of the stairs. After I fixed that all was o. k.

But your trouble may have another reason of course.

[Bullfye]

Hi Tamira...

I mean Real door cause the house mod main door , the one that connects to Skyrim its not the actual enter door to the house, it enters to a temple corridor and after its the house door inside...

The house door its the one that is giving me problems with followers...

Maybe doing it again will fix the issue I guess I will be trying that today...but if not Maybe I am missing something ...

The nave mesh its fine cause this door its the only door they do not get in...

[WillieSea]

The navmesh must be finalized and the triangle a different color under the 'door marker' on both sides of the door. Otherwise NPC's will not be able to path through the door.

[Bullfye]

The navmesh must be finalized and the triangle a different color under the 'door marker' on both sides of the door. Otherwise NPC's will not be able to path through the door.

It was finalized mate...

...and the triangles were all green...and connected.

Well , everything works fine now...The problem was that after nave meshing I hit the button to optimize it and do not know why it created extra triangles that I deleted cause was no need to them...the thing was that I also fixed the green triangles position and since I tested the NM time and time again during the process and had no warning I fixed manually all these triangles that are near the door to position nicely the green triangles ...

... a huge mistake cause that was the cause for the NPC can't enter the doors... I have remeshed it and didn't do nothing to these triangles now, and now everything works just fine...

TY..

I am finishing it and will upload the house upon finalizing the exterior.

TY all for the help on this subject..